ASTM A335 alloy pipe

ASTM A335 seamless ferritic alloy-steel pipe for high-temperature service. The pipe shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Grade P2 and P12 steel pipes shall be made by coarse-grain melting practice.

Our products for ASTM A335 alloy steel pipes have been listed as follows:
ASTM A335 P11 alloy steel pipe
ASTM A335 P11 alloy steel pipe
ASTM A335 P91 Alloy Seamless Steel Pipe
ASTM A335 P91 Alloy Seamless Steel Pipe
ASTM A335 Grade P22 Alloy pipes
ASTM A335 Grade P22 Alloy pipes

ASTM A335 P5 Alloy Seamless Steel Pipes
ASTM A335 P5 Alloy Seamless Steel Pipes
ASTM A335 P9 Alloy Steel Pipes
ASTM A335 P9 Alloy Steel Pipes
ASTM A335 P92 Alloy Seamless Steel Pipe
ASTM A335 P92 Alloy Seamless Steel Pipe


The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices. The range of pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practices. The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.

Mainly Grade of ASTM A335:

  • ASTM A335 P11,  ASTM A335  P22,  ASTM A335  P5,  ASTM A335  P9,  ASTM A335  P91,  ASTM A335  P92

Chemical Composition (%) for the main grade

Grade
C
Mn
P, S, max
Si
Cr
Mo
P11
0.05-0.15
0.30-0.60
0.025
0.50-1.00
1.00-1.50
0.44-0.65
P22
0.05-0.15
0.30-0.60
0.025
0.50 max
1.90-2.60
0.87-1.13
P5
0.15 max
0.30-0.60
0.025
0.50 max
4.00-6.00
0.45-0.65
P9
0.15 max
0.30-0.60
0.025
0.25-1.00
8.00-10.00
0.90-1.10
P91
0.08-0.12
0.30-0.60
0.020/0.010
0.20-0.50
8.00-9.50
0.85-1.05
V 0.18-0.25
N 0.03-0.07
Ni 0.40 max
Al 0.02 max
Nb 0.06-0.10
Ti 0.01 max
P92
0.07-0.13
0.30-0.60
0.020/0.010
0.50 max
8.50-9.50
0.30-0.60
V 0.15-0.25
N 0.03-0.07
Ni 0.40 max
Al 0.02 max
Nb 0.04-0.09
W 1.50-2.00
B 0.001-0.006
Ti 0.01 max
Zr 0.01 max

Mechanical Properties

Grade P11, P22, P5, P9
Grade P91
Grade P92
Tensile strength, min, (MPa)
415
585
620
Yield strength, min, (MPa)
205
415
440
Elongation, min, (%), L/T
30/20
20/…
20/…
Heat Treatment
A / N+T
N+T / Q+T
N+T

Material & Manufacture

Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.

Get in Touch

Welcome to Sunny Steel Enterprise Ltd.

Sunny Steel provide a wide range of steel products as Steel pipes, Seamless tube and seamless pipes, Alloy pipes, Pipe fittings, Composite steel pipe used in the industry, construction etc.

You can get in touch by telephone, post, online or E-mail.

Please check the help section first to see if your question may be answered there.

Seamless steel pipe >>

Seamless steel pipe >>
Seamless steel pipe is alos called CDS pipes (Cold drawn seamless pipe).

Flanges General

Flanges General
A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system.

Weldable Components

Weldable Components
Weldable components are used to connect pipes that include elbow, tee, cross, reducer & bending.