A335 P11

ASTM A335 P11 is the part of ASTM A335, the pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding.

The steel material shall conform to chemical composition, tensile property, and hardness requirements.

A335 P9

ASTM A335 P9 Alloy steel pipe apply to petroleum, chemical industry, electric power, boiler, high temperature resistant, low temperature resistant, corrosion resistant.

ASTM A335 P9 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.

The range of ASTM A335 P9 alloy steel pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.

Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.

The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

• Outer Dimensions: 19.05mm – 114.3mm
• Wall Thickness: 2.0mm – 14 mm
• Length: max 16000mm

Steel grade: ASTM A335 P9 alloy steel pipe

Packing of ASTM A335 P9 alloy steel pipe:

Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.

Inspection and Test of ASTM A335 P9 alloy steel pipe:

Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.

Surface treatment of ASTM A335 P9 alloy steel pipe:

Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

ASTM A335 P9 alloy steel pipe alloy steel pipe Chemical Compositions(%)

Compositions	Data
UNS Designa-tion	K41545
Carbon(max.)	0.15
Manganese	0.30-0.60
Phosphorus(max.)	0.025
Silicon(max.)	0.50
Chromium	4.00-6.00
Molybdenum	0.45-0.65
Other Elements	…

Mechanical properties for ASTM A335 P9 alloy steel pipe

Properties	Data
Tensile strength, min, (MPa)	415 Mpa
Yield strength, min, (MPa)	205 Mpa
Elongation, min, (%), L/T	30/20

Material & Manufacture of ASTM A335 P9 alloy steel pipe

Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.

Heat Treatment of ASTM A335 P9 alloy steel pipe

• A / N+T
• N+T / Q+T
• N+T

Mechanical Tests Specified of ASTM A335 P9 alloy steel pipe

• Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
• For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
• For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.

Notes for Bend Test of ASTM A335 P9 alloy steel pipe:

• For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
• Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
• The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

A335 P91

ASTM A335 P91 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.

Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.

ASTM A335 P91 high pressure semaless boiler pipe, The range of ASTM A335 P91 seamless alloysteel pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice. The range of ASTM A335 P91 pipe sizes that may be examined by each method shall be subjected to the limitations in the scope of the respective practice.

The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

• Outer Dimensions: 19.05mm – 114.3mm
• Wall Thickness: 2.0mm – 14 mm
• Length: max 16000mm

Steel grade: ASTM A335 P91

Packing:

Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.

Inspection and Test:

Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.

Surface treatment:

Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

ASTM A335 P91 Chemical Compositions(%)

Compositions	Data
UNS Designa-tion	K91560
Carbon(max.)	0.08-0.12
Manganese	0.30-0.60
Phosphorus(max.)	0.025
Silicon(max.)	0.50
Chromium	4.00-6.00
Molybdenum	0.45-0.65
Other Elements	…

Mechanical properties for ASTM A335 P91

Properties	Data
Tensile strength, min, (MPa)	415 Mpa
Yield strength, min, (MPa)	205 Mpa
Elongation, min, (%), L/T	30/20

Material & Manufacture

Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.

Heat Treatment

• A / N+T
• N+T / Q+T
• N+T

Mechanical Tests Specified

• Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
• For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
• For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.

Notes for Bend Test:

• For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
• Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
• The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

ASTM A335 P9 Alloy Steel Pipes

ASTM A335 P9 Alloy Steel Pipes

alloy steel, Alloy steel pipe, ASTM A335, ASTM A335 p9, Steel pipe, steel pipes

ASTM A335 P9 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

Material & Manufacture

• Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.

Heat Treatment

• A / N+T
• N+T / Q+T
• N+T

Mechanical Tests Specified

• Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
• For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
• For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.

Notes for Bend Test:

• For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
• Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
• The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.
• 
  

Chemical Requirements of ASTM A335 P9

Chemical elements	Data
UNS Designa-tion	K41545
Carbon(max)	0.15
Manganese	0.30-0.60
P&S(max)	0.025
Silicon(max)	0.50
Chromium	4.00-6.00
Molybdenum	0.45-0.65
Others	—

Mechanical Properties  of ASTM A335 P9

Properties	Data
Tensile strength, min, (MPa)	415
Yield strength, min, (MPa)	205
Elongation, min, (%), L/T	30/20

 Permitted tolerance for OD

OD	Plus tolerance(+)	Minus tolerance (-)
10.29—48.3	0.4	0.4
<48.3—-≤114.3	0.79	0.79
<114.3—≤219.1	1.59	0.79
<219.1—≤323.9	2.38	0.79
<323.9	±1%

Wall thickness is average wall or according to ASME SA530.

ASTM A335 P11 alloy steel pipe

a335, alloy steel, ASTM A335, ASTM A335 P11, ASTM A335 pipe, p11

ASTM A335 P11 is the part of ASTM A335, the pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements. Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.

The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

Material & Manufacture

Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.

Heat Treatment

• A / N+T
• N+T / Q+T
• N+T

Mechanical Tests Specified

• Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
• For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
• For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.

Notes for Hardness Test:

• P11 shall not have a hardness not exceeding 250 HB/265 HV [25HRC].

Notes for Bend Test:

• For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
• Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
• The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

Chemical Requirements of ASTM A335 P11

Chemical elements	Data
UNS Designa-tion	K11597
Carbon	0.05-0.15
Manganese	0.30-0.60
P&S(max)	0.025
Silicon	0.50-1.00
Chromium	1.00-1.50
Molybdenum	0.44-0.65
Others	—

Mechanical Properties  of ASTM A335 P11

Properties	Data
Tensile strength, min, (MPa)	415
Yield strength, min, (MPa)	205
Elongation, min, (%), L/T	30/20

ASTM A333 Grade 8 Seamless Pipes

ASTM A333 Grade 8 Seamless Pipes

ASME SA333 Gr.8 Seamless Steel Pipe

alloy steel, ASME SA333 Gr.8, astm a333, ASTM A333 Gr.8, ASTM A333 Grade 8, gr 8, seamless steel pipe

ASTM A333 Standard covers seamless and welded steel pipe for low temperature service. The Grade 8 steel involved is similar to AISI 4032 low alloy steel. ASTM A333 Grade 8 pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation.

Seamless and Welded Steel Pipe size for Low-Temperature Service:

• Outer Dimensions: 19.05mm-114.3mm
• Wall Thickness:2.0mm-14 mm
• Length: max 16000mm

Application: Seamless and Welded Steel Pipe for Low-Temperature Service.
Steel grade: ASTM A333 Grade 8

Inspection and Test:

• Chemical Composition Inspection, Mechanical Properties Test
• Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test
• Surface and Dimension Test,No-destructive Test, Hydrostatic Test.

Crade	The lowest temperature for strike test
	℉	℃
ASTM A333 Grade 8	-320	-195

ASTM A333 Gr. 8 Chemical Compositions(%)

Grade	Chemical Composition (%)
	C(max)	Si	Mn	P(max)	S(max)	Cr	Ni
Grade 8	0.13	0.13-0.32	0.9	0.025	0.025	--	8.40-9.60

ASTM A333 Gr.7 Mechanical Properties

Grade	Tensile Strength (MPa）	Yield Point (MPa)	Elongation (%)
			Y	X
ASTM A333 Grade 8	≥690	≥515	≥22	--

Impact temperature

Minimum Impact Test Temperature -45 C(-50 F)

Impact requirements

Size	Minimum Average Notched Bar Impact Value of Each Set of Three Specimens		Minimum Notched Bar Impact Value of One Specimen Only of a Set
Size of Specimen, mm	ft-lbf	J	ft-lbf	J
10 by 10	13	18	10	14
10 by 7.5	10	14	8	11
10 by 6.67	9	12	7	9
10 by 5	7	9	5	7
10 by 3.33	5	7	3	4
10 by 2.5	4	5	3	4

Straight line interpolation for intermediate values is permitted.

Impact temperature reduction

Specimen Width Along Notch or Actual Material Thickness mm	Temperature Reduction,Degrees Colder C
10 (standard size)	0
9	0
8	0
7.5 (3/4 standard size)	3
7	4
6.67 (2/3 standard size)	5
6	8
5 (1/2 standard size)	11
4	17
3.33 (1/3 standard size)	19
3	22
2.5 (1/4 standard size)	28

P Number/ Group Number

ASTM A333	Grade 6
P Number	1
Group	1

Machinability

Machinability is good, similar to law alloy 4032 steel.

Forming

The product comes in piping form but may be formed readily by conventional methods.

Welding

Weldable by conventional methods.

Heat Treatment

Product is supplied in the normalized, 1500 f and air cooled, condition. It may be quenched and tempered by heating to 1475 F, quench in circulating water and then temper by re-heating to 1100 F and rapid air cooling.

Forging

Product is supplied in pipe form and not normally forged from that shape.

Hot Working

Hot working may be done qt 2000 F down to 1600 F if need be. Do not hot work below 1550 F and immediately following hot working cool in a controlled atmosphere furnace from a temperature above 1550 F.

Cold Working

Cold working may be done by conventional methods.

Annealing

Anneal, or normalize, at 1600 F and air cool.

Strike Temperature Condition

Grade	The lowest temperature for strike test
	℉	℃
ASTM A333 Gr.6	-150	-100

Packing:

• Packed in wooden crates, wrapped in plastic, and suitably protected for sea-worthly delivery or as requested.
• Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

Delivery:

Pipes are supplied in hexagonal bundles or round bundles tied with steel strip.
Weight of bundle – up to 5000 kg upon request of customer.
Each bundle is furnished with three tags.

ASTM A333 Grade 7 Seamless Pipes

ASME SA333 Gr.7 Seamless Steel Pipe

alloy steel, ASME SA333 Gr.7, astm a333, ASTM A333 Gr.7, ASTM A333 Grade 7, gr 7, seamless steel pipe

ASTM A333 Standard covers seamless and welded steel pipe for low temperature service. The Grade 7 steel involved is similar to AISI 4032 low alloy steel. ASTM A333 Grade 7 pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation.

Seamless and Welded Steel Pipe size for Low-Temperature Service:

• Outer Dimensions: 19.05mm-114.3mm
• Wall Thickness:2.0mm-14 mm
• Length: max 16000mm

Application: Seamless and Welded Steel Pipe for Low-Temperature Service.
Steel grade: ASTM A333 Grade 7
Inspection and Test:

• Chemical Composition Inspection, Mechanical Properties Test
• Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test
• Surface and Dimension Test,No-destructive Test, Hydrostatic Test.

Crade	The lowest temperature for strike test
	℉	℃
ASTM A333 Grade 7	-100	-75

ASTM A333 Gr. 7 Chemical Compositions(%)

Grade	Chemical Composition (%)
	C(max)	Si	Mn	P(max)	S(max)	Cr	Ni
Grade 7	0.19	0.13-0.32	0.9	0.025	0.025		2.03-2.57

ASTM A333 Gr.7 Mechanical Properties

Grade	Tensile Strength (MPa）	Yield Point (MPa)	Elongation (%)
			Y	X
ASTM A333 Grade 7	≥450	≥240	≥30	≥22

Impact temperature

Minimum Impact Test Temperature -45 C(-50 F)

Impact requirements

Size	Minimum Average Notched Bar Impact Value of Each Set of Three Specimens		Minimum Notched Bar Impact Value of One Specimen Only of a Set
Size of Specimen, mm	ft-lbf	J	ft-lbf	J
10 by 10	13	18	10	14
10 by 7.5	10	14	8	11
10 by 6.67	9	12	7	9
10 by 5	7	9	5	7
10 by 3.33	5	7	3	4
10 by 2.5	4	5	3	4

Straight line interpolation for intermediate values is permitted.

Impact temperature reduction

Specimen Width Along Notch or Actual Material Thickness mm	Temperature Reduction,Degrees Colder C
10 (standard size)	0
9	0
8	0
7.5 (3/4 standard size)	3
7	4
6.67 (2/3 standard size)	5
6	8
5 (1/2 standard size)	11
4	17
3.33 (1/3 standard size)	19
3	22
2.5 (1/4 standard size)	28

P Number/ Group Number

ASTM A333	Grade 6
P Number	1
Group	1

Machinability

Machinability is good, similar to law alloy 4032 steel.

Forming

The product comes in piping form but may be formed readily by conventional methods.

Welding

Weldable by conventional methods.

Heat Treatment

Product is supplied in the normalized, 1500 f and air cooled, condition. It may be quenched and tempered by heating to 1475 F, quench in circulating water and then temper by re-heating to 1100 F and rapid air cooling.

Forging

Product is supplied in pipe form and not normally forged from that shape.

Hot Working

Hot working may be done qt 2000 F down to 1600 F if need be. Do not hot work below 1550 F and immediately following hot working cool in a controlled atmosphere furnace from a temperature above 1550 F.

Cold Working

Cold working may be done by conventional methods.

Annealing

Anneal, or normalize, at 1600 F and air cool.

Strike Temperature Condition

Grade	The lowest temperature for strike test
	℉	℃
ASTM A333 Gr.6	-150	-100

Packing:

• Packed in wooden crates, wrapped in plastic, and suitably protected for sea-worthly delivery or as requested.
• Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

Delivery:

Pipes are supplied in hexagonal bundles or round bundles tied with steel strip.
Weight of bundle – up to 5000 kg upon request of customer.
Each bundle is furnished with three tags.